Table 18: Fail2Ban Settings; Figure 31: Fail2Ban Settings - Grandstream Networks UCM6100 Series User Manual

Global Settings
Enable Fail2Ban. The default setting is disabled. Please make sure both "Enable
Enable Fail2Ban Fail2Ban" and "Asterisk Service" are turned on to use Fail2Ban for SIP
authentication on the UCM6100.
Configure the duration (in seconds) for the detected host to be banned. The default
Banned Duration
setting is 600. If set to 0, the host will be always banned.

Figure 31: Fail2ban Settings

Table 18: Fail2Ban Settings

UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 82