Inbound Route: Import/Export Inbound Route
Users can now import and export inbound routes to quickly set up inbound routing on a UCM or to back up an
existing configuration. An exported inbound route configuration can be directly imported without needing any
manual modifications.
The imported file should be on CSV format and using UTF-8 encoding, the imported file should contain below
columns, and each column should be separated by a comma (It is recommended to use Notepad++ for the
imported file creation):
•
Disable This Route: Yes/No.
•
Pattern: Always prefixed with _
•
CallerID Pattern: Always prefixed with _
•
Prepend Trunk Name: Yes/No.
•
Prepend User Defined Name Enable: Yes/No.
•
Prepend User Defined Name: A string.
•
Alert-info: None, Ring 1, Ring 2... User should enter an Alert-info string following the values we have in
the Inbound route Alert-Info list.
•
Allowed to seamless transfer: [Extension_number]
•
Inbound Multiple Mode: Yes/No.
•
Default Destination: By DID, Extension, Voicemail... User should enter a Default Destination string
following the values we have in the Inbound route Default Destination list.
•
Destination: An Extension number, Ring Group Extension...
•
Default Time Condition.
•
Mode 1: By DID, Extension, Voicemail... User should enter a Default Destination string following the
values we have in the mode 1 Default Destination list.
•
Mode 1 Destination: An Extension number, Ring Group Extension...
•
Mode 1 Time Condition.
Figure 123: Import/Export Inbound Route
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
213