Firmware Version 1.0.3.13; Firmware Version 1.0.2.21 - Grandstream Networks UCM6100 Series User Manual

•
Added option "Skip voicemail password verification" on extension edit page. [Table 34: SIP Extension
Configuration Parameters]
•
Added Hot-Desking Support. [Table 34: SIP Extension Configuration Parameters]
•
Added one-button on-demand call recording for GXP
•
Add new option to enable or disable "FXS TISS Override" on Hardware Config page. [PBX Interface
Settings]
•
Added more modes for FXS Two-Wire Impedance Synthesis
•
Added LDAP Sync manual trigger function and synced date displaying. [VOIP TRUNKS]
•
Improved LDAP Sync function, added retrying, file verifying and progress displaying function
•
Added option "Pick Extension Period" on auto-provision settings page of Zero Config
•
Added multiple extension assignment support on device edit page of Zero Config
•
Added "Reset All Extensions" button at the Zero Config page to recycle all assigned extensions. [Auto
Provisioning]
•
Added system crash alarm, core dump detection and allow users to download core dump file. [Figure 256:
System Events→Alert Events Lists: System Crash]
•
Add "Keep Trunk CID" option for VoIP trunks, and keep the priorities: DOD→Extension CallerID→Trunk
CallerID→Global CallerID. [Table 53: Create New SIP Trunk]

Firmware Version 1.0.3.13

•
Added Fail2Ban support for SIP authentication. [Fail2ban]
•
Added "Auto Record" option for trunk.
•
Added "Digit Timeout" option and voice prompt "Language" selection for IVR. [IVR Configuration Parameters]
•
Added "Direct Dial Voicemail Prefix" feature code to directly dial or transfer to extension's voicemail. [Table
87: UCM6100 Feature Codes]
•
Added "Enforce Strong Passwords" option. [Table 91: Internal Options/General]
•
Added FXS MWI Mode. [PBX Interface Settings]
•
Added system events with alert and Email notification support. [System Events]
•
Added new web page for recording files. [Recording Files]

Firmware Version 1.0.2.21

•
Added weight information. [Table 1: Technical Specifications]
•
Added NTP server support. [NTP Server]
•
Added Czech language for web GUI display. [Web GUI Languages]
•
Added VLAN support. "Layer 2 QoS 802.1Q/VLAN tag" and "Layer 2 QoS 802.1p priority value" options for
network port settings are added. [Network Settings ]
•
Updated LDAP client configurations information.
•
Added sample Email settings. [Email]
•
Added "Enable Pick Extension" and "Extension Segment" options for auto provisioning settings.
•
Changed one of the discovery methods from "SIP MESSAGE (OPTIONS)" to "SIP MESSAGE (NOTIFY)" in
zero-config feature.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 37