Firmware Version 1.0.5.19; Firmware Version 1.0.5.14; Firmware Version 1.0.4.7 - Grandstream Networks UCM6100 Series User Manual

•
Added option "The Maximum Number of Call Line" for trunk.
•
Added Dial By Name. [DIAL BY NAME]
•
Added voicemail password and Email address for voicemail group extension.
•
Added auto record support for ring group and call queue.
•
Added VFax file display, download and delete interface in Web GUI.
•
Changed web page name from "Hardware Config" to "Ports Config".
•
Added payload configuration for audio/video codecs. [PBX Settings/Payload]
•
Added activity calls status on Web GUI status page.
•
Added CDR API support. [CDR API]
•
Added more alert events support such as Register SIP Failed, Register SIP Trunk Failed, Restore Config,
User Login Success, User Login Failed, SIP Internal Call Failure and etc. [Alert Events List]

Firmware Version 1.0.5.19

•
Added built-in data migration tool to support upgrading from 1.0.4.7 to 1.0.5.19 without factory reset.
•
Added "Direct Dial Voicemail Prefix" feature code back. [Table 87: UCM6100 Feature Codes]
•
Changed valid range for option "Current Disconnect Threshold". [Table 51: Analog Trunk Configuration
Parameters]

Firmware Version 1.0.5.14

•
New backend data structure and Web GUI performance improvement. 1.0.5.14 is not compatible with
previous firmware versions. Once upgraded to 1.0.5.14, the device needs to be FULLY RESET and RE-
CONFIGURED MANUALLY.
•
Added traditional Chinese language for Web GUI. [Web GUI Languages]
•
Added "Enable Filter Source Caller ID" and "Custom Dynamic Route" options for outbound route settings.
[Table 60: Outbound Route Configuration Parameters]
•
Added more language support for voice prompt. [LANGUAGE SETTINGS]
•
Added "Ring Group Destination" for ring group configuration. [Table 72: Ring Group Parameters]
•
Added "Extension Groups" section in Web GUI. [EXTENSION GROUPS]
•
Added "Pickup Groups" section in Web GUI. [PICKUP GROUPS]
•
Added BLF function description. [BLF AND EVENT LIST]
•
Updated default extension range. [Table 91: Internal Options/General]
•
Added sample descriptions for downloaded CDR file. [Downloaded CDR File]

Firmware Version 1.0.4.7

•
Asterisk updated to version 1.8.23.1.
•
Added DID routing support for incoming calls. [Table 53: Create New SIP Trunk]
•
Added DOD routing support. [Direct Outward Dialing (DOD)]
•
Added GXP one-button Voicemail access. [Table 34: SIP Extension Configuration Parameters]
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 36