The UCM6100 supports ring group feature with different ring strategies applied to the ring group members. This
section describes the ring group configuration on the UCM6100.
Configure Ring Group
Ring group settings can be accessed via Web GUI→Call Features→Ring Group.
•
Click on
to add ring group.
•
Click on
to edit the ring group. The following table shows the ring group configuration parameters.
•
Click on
to delete the ring group.
Ring Group Name
Extension
Members
LDAP Phonebook
Ring Strategy
RING GROUP
Figure 146: Ring Group
Table 72: Ring Group Parameters
Configure ring group name to identify the ring group. Letters, digits, _ and –
are allowed.
Configure the ring group extension.
Select available users from the left side to the ring group member list on the
right side. Click on
Select available remote users from the left side to the ring group member list
on the right side. Click on
be enabled first.
Select the ring strategy. The default setting is "Ring in order".
•
Ring simultaneously.
Ring all the members at the same time when there is incoming call to the
ring group extension. If any of the member answers the call, it will stop
ringing.
UCM6100 Series User Manual
Version 1.0.18.13
to arrange the order.
to arrange the order. Note: LDAP Sync must
P a g e
|
245