•
Added ability to specify trunks in CDR filters. [CDR]
•
Added ability to use Pattern in Caller Number to filter CDR. [CDR]
•
Added support to send UNREGISTER when VoIP trunk is disabled. [Table 54: SIP Register Trunk
Configuration Parameters]
•
Added LDAP Client support [LDAP Client Configurations]
•
Added option to specify the chronological order of voice mails. [Table 68: Voicemail Settings]
•
Added option to configure whether to skip pressing 1/2 to accept or reject calls from Follow Me. [Table 81:
Follow Me Settings]
•
Added option to specify port range in Port Forwarding configuration. [Table 12: UCM6102 Network
Settings→Port Forwarding]
•
Added ability to go back to IVR menu from Dial By Name by pressing the star key. [Dial by Name
Configuration]
•
Added support to upgrade SIP end device via SD card in Zero Config. [Table 28: Global Policy Parameters
– Maintenance]
•
Added ability to filter alert logs. [Alert Log]
•
Added ability to delete alert logs. [Alert Log]
•
Added NAT option for peer trunk. [SIP Peer Trunk Configuration Parameters]
•
Improved Automatic Download CDR result format.[CDR]
Firmware Version 1.0.8.12
•
Added recording files store management. [PBX Settings/Recordings Storage]
•
Added AMI access (restricted). [ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)]
•
Added LDAP Phonebook Import/Export support. [LDAP Phonebook]
•
Added Callback feature. [CALLBACK FEATURES]
•
Added Busy Camp-on (Call Completion) feature. [busy camp-on]
•
Added external number calling via extension. [Table 36: SIP Extension Configuration
Parameters→Features]
•
Added end point firmware management support to allow end point device to upgrade via UCM6100 local
storage or USB media. [Table 28: Global Policy Parameters – Maintenance]
•
Added link to access phone web GUI in Zero Config. [Manage Devices]
•
Added model update support to download model templates for surveillance and GSWave. [Model Update]
•
Added filter for searching in Alert Log. [Alert Log]
•
Added DAHDI Out Line Selection. [Table 51: Analog Trunk Configuration Parameters]
•
Added automatic CDR download. [CDR]
•
Added multi-user management and concurrent user login support. [User Management]
•
Added operation log. [Operation Log]
•
Added option to specify web access session timer. [Login Settings]
•
Added call monitor/barge-in support.
•
Added GSwave QR code support. [E-mail Notification]
•
Added ability to add customized Pvalue on Model Template. [Model templates]
•
Updated maximum length of Web GUI login password to 30 characters. [Change Password]
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
34