Model Configuration; Model Templates; Table 33: Create New Model Template - Grandstream Networks UCM6100 Series User Manual

Model configuration

Model templates

Model layer configuration allows users to apply model-specific configurations to different devices. Users could
create/edit/delete a model template by accessing Web GUI, page Value-added Features→Zero
Config→Model Templates. If multiple model templates are created and enabled, when the user configures the
device in Edit Device dialog→Advanced Settings, the user can select to use one of the model template for the
device. Please refer to section
For each created model template, users can assign it as default model template. If assigned as default model
template, the values in this model template will be applied to all the devices of this model. There is always only
one default model template that can be assigned at one time on the UCM6100.
The selected model template and the default model template will both take effect when generating the config file
for the device. However, the model template has higher priority to default model template when it comes to the
same setting option/field. If the same option/field has different value configured in the default model template
and the selected model template, the value for this option/field in the selected model template will override the
value in default model template.
•
Click on "Create New Template" to add a model template.
Model
Template Name
Description
Default Model Template
Active
•
Click on to edit the model template.
for more details on using the model template.
[Manage Devices]

Table 33: Create New Model Template

Select a model to apply this template. The supported Grandstream models
are listed in the dropdown list for selection.
Create a name for the model template.
Enter a description for the model template. This is optional.
Select to assign this model template as the default model template. The value
of the option in default model template will be overridden if other selected
model template has a different value for the same option.
Check this option to enable the model template.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 121