Skip Authentication
When Inviting User
If enabled, the invitation from Web GUI for a conference room with password will
via Trunk from Web
skip the authentication for the invited users. The default setting is "No".
GUI
Conference Settings contains the following options:
Enable Talk detection
DSP Talking Threshold
DSP Silence Threshold
Users can check the talking Caller IDs in conference control page (UCM WebUI→Call Features→Conference).
The image will move up and down when the user is talking.
Join a Conference Call
Table 64: Conference Settings
If enabled, the AMI will send the corresponding event when a user
starts or ends talking.
The time in milliseconds of sound above what the dsp has
established as base line silence for a user before a user is
considered to be talking. This value affects several operations and
should not be changed unless the impact on call quality is fully
understood, the default value is 128.
The time in milliseconds of sound falling within the what the dsp
has established as base line silence before a user is considered
to be silent. This value affects several operations and should not
be changed unless the impact on call quality is fully understood,
the default value is 2500.
Figure 126: Conference
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
218