3
Commissioning as function module F24
3
Commissioning as function module F24
3.1
General instructions for commissioning
Note
Before commissioning, you must have installed the CPX terminal correctly
(è Chapter 2).
General information on commissioning the CPX terminal as well as a detailed description
of individual parameters is found in the CPX system description (P.BE-CPX-SYS-...).
Information on commissioning the pneumatic interface and I/O modules is found in the
description for the CPX I/O modules (P.BE-CPX-EA-...).
Notes on commissioning the pneumatic components can be found in the corresponding
description of pneumatics.
3.2
Configuration and addressing
3.2.1
Number of inputs/outputs
Caution
For operation of the bus node CPX-FB23-24 as a function module F24 (CC-Link
version 2.0), the DIL switch element 3. 8 of the DIL-switch 3 must be set on "ON"
(è Section 2.4.6).
Festo – P.BE-CPX-FB23-24-EN – 1411b – English
33