Configuring Password Authentication For Telnet Login - HP 10500 Series Configuration Manual

Step
4. (Optional.) Assign a user
role.
The next time you Telnet to the device, you do not need to provide a username or password, as shown
in Figure 12.
Figure 12 Telnetting to the device without authentication

Configuring password authentication for Telnet login

Step
1. Enter system view.
2. Enter VTY line view or
class view.
Command
user-role role-name
Command
system-view
•
Enter VTY line view:
line vty first-number
[ last-number ]
•
Enter VTY line class view:
line class vty
55
Remarks
By default, a VTY line user of the default
MDC is assigned the user role
network-operator. A VTY line user of a
non-default MDC is assigned the user role
mdc-operator.
Remarks
N/A
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user lines
of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class
view.
A setting in user line class view takes
effect only for users who log in after the
configuration is completed. It does not
affect online users.