Examples Of Using Install Commands For Issu On An Eirf System; Feature Upgrade Example - HP 10500 Series Configuration Manual

flash:/feature1-r0202.bin
Active packages on chassis 2 slot 0:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/feature1-r0202.bin
Active packages on chassis 2 slot 1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/feature1-r0202.bin
# Commit the software changes.
<Sysname> install commit
This operation will take several minutes, please wait...........................Done.
Examples of using install commands for ISSU on an
eIRF system

Feature upgrade example

Upgrade requirements
As shown in
is connected only to the master. PEX 2 is connected to both parent devices.
In the parent fabric:
The master has two MPUs (active in slot 0 and standby in slot 1) and two LPUs (in slot 8 and slot 12).
•
The subordinate member has one MPU (in slot 0) and one LPU (in slot 8).
•
Upgrade the feature as follows:
From a0041 to the compatible version a0042 on the parent IRF fabric.
•
From d2402 to the compatible version d2403 on the PEXs.
•
Figure 45, the eIRF system contains a two-chassis parent fabric and two 5700 PEXs. PEX 1
193