HP 10500 Series Configuration Manual page 54

Login method Default settings and minimum configuration requirements
By default, SSH login is disabled.
To enable SSH login, perform the following tasks:
•
•
•
SSH login
•
•
By default, SNMP access is disabled.
To enable SNMP access, perform the following tasks:
SNMP access
•
•
Enable the SSH server feature and configure SSH attributes.
Assign an IP address to a Layer 3 interface. Make sure the
interface and the SSH client can reach each other.
Configure scheme authentication for VTY login users
(password authentication by default).
Assign a user role to VTY login users (network-operator by
default).
Assign an IP address to a Layer 3 interface. Make sure the
interface and the NMS can reach each other.
Configure SNMP basic parameters.
44
Login configuration
Configuring SSH
login
Accessing the device
through SNMP