Task
Partition a storage medium.
Setting the operation mode for files and folders
The device supports the following file and folder operation modes:
•
alert—The system prompts for confirmation when your operation might cause problems such as file
corruption and data loss. This mode provides an opportunity to cancel a disruptive operation.
quiet—The system does not prompt for confirmation.
•
To set the operation mode for files and folders:
Step
1.
Enter system view.
2.
Set the operation mode for
files and folders.
Command
fdisk medium-name
[ partition-number ]
Command
system-view
file prompt { alert | quiet }
99
Remarks
By default, a CF card or USB disk has only
one partition, cfa0: or usba0:.
To partition a storage medium evenly,
specify the partition-number argument. To
customize the sizes of partitions, do not
specify the partition-number argument.
Remarks
N/A
The default mode is alert.