Authentication
mode
Password
Scheme
Disabling authentication for console login
Step
1.
Enter system view.
2.
Enter console user interface
view.
3.
Disable authentication.
4.
Configure common settings
for console login.
The next time you attempt to log in through the console port, you do not need to provide any username
or password.
Configuring password authentication for console login
Step
1.
Enter system view.
2.
Enter console user interface
view.
Configuration tasks
Enable password authentication on the console user
interface.
Set a password.
Enable scheme authentication on the console user
interface.
Configure local or remote authentication settings.
To configure local authentication:
1.
Configure a local user and specify the password on
the device.
2.
Configure the device to use local authentication.
To configure remote authentication:
1.
Configure the RADIUS or HWTACACS scheme on
the device.
2.
Configure the username and password on the AAA
server.
3.
Configure the device to use the scheme for user
authentication.
Command
system-view
user-interface console 0
authentication-mode none
See
"Configuring common console
user interface settings
Command
system-view
user-interface console 0
(optional)."
26
Reference
"Configuring password
authentication for console
login"
"Configuring scheme
authentication for console
login"
Remarks
N/A
N/A
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3.
Optional.
Remarks
N/A
N/A