Configuring Password Authentication For Console Login - HP 5800 Series Configuration Manual

Procedure
To configure none authentication for console login:
Step
1. Enter system view.
2. Enter AUX user interface view.
3. Specify the none
authentication mode.
4. Configure common settings
for AUX user interface view.
After the configuration, the next time you log in to the device through the console port, you are prompted to
press enter. A prompt such as <HP> appears after you press Enter, as shown in
Figure 7 Configuration page

Configuring password authentication for console login

Prerequisites
You have logged in to the device.
Command
system-view
user-interface aux
first-number
[ last-number ]
authentication-mode
none
—
30
Remarks
—
—
Required.
By default, log in to the device through the
console port without authentication, and have
user privilege level 3 after login.
Optional.
See "Configuring common settings for console
login (optional)."
Figure 7.