Automatic Irf Setup - HP 10500 Series Configuration Manual

<DeviceB> telnet 192.168.1.2
4. Enter the username user and password abcabc as prompted. (Details not shown.)
You are logged in to Device A.

Automatic IRF setup

Network requirements
As shown in
Configure the servers so the switches can obtain a Python script to complete their respective configuration
and form an IRF fabric.
Figure 50 Network diagram
Configuration procedure
1. Assign IP addresses to the interfaces. Make sure the devices can reach each other. (Details not
shown.)
2. Configure the following files on the HTTP server:
File
.cfg configuration file
sn.txt
(Optional.) .ipe or .bin
software image file
Figure 50, Switch A and Switch B do not have a configuration file.
Content
Commands required for IRF setup.
Serial numbers of the member switches.
Software images.
213
Remarks
You can create a configuration
file by copying and modifying
the configuration file of an
existing IRF fabric.
Each SN uniquely identifies a
switch.
These SNs will be used for
assigning a unique IRF member
ID to each member switch.
If the member switches are
running different software
versions, you must prepare the
software image file used for
software upgrade.