Configuring Password Authentication For Console/Aux Login - HP 12500 Configuration Manual

The next time you attempt to log in through the console or AUX port, you do not need to provide any
username or password, as shown in
Figure 13 Accessing the CLI through the console port without authentication
Figure 14 Accessing the CLI through the AUX port without authentication

Configuring password authentication for console/AUX login

Step
1. Enter system view.
2. Enter console/AUX user
interface view.
3. Enable
authentication.
4. Set a password.
Figure 13
Command
system-view
user-interface { aux | console }
first-number [ last-number ]
password
authentication-mode password
set authentication password { hash |
simple } password
and Figure 14.
43
Remarks
N/A
N/A
By default, the authentication mode is
none for the console user interface
and password for the AUX user
interface.
By default, no password is set.