Verifying The Configuration; Non-Issu Pex Upgrade Example; Network Requirements; Configuration Procedure - HP 10500 Series Configuration Manual

Verifying the configuration

# Verify that the IRF fabric is running the correct software.
<Sysname> display version

Non-ISSU PEX upgrade example

Network requirements

As shown in
• Each IRF member device has two MPUs: one in slot 0 and one in slot 1. The global active MPU is
in slot 0 on the master device.
The IRF fabric has two PEXs: one PEX-5700 switch in virtual slot 0 of virtual chassis 1 10 and one
•
PEX-5700 switch in virtual slot 0 of virtual chassis 120. The PEX-5700 switch has a storage medium.
Use the file startup-5700.ipe to upgrade the PEX-5700 switch.
Figure 35 Network diagram

Configuration procedure

# Configure IP addresses and routes. Make sure the IRF fabric and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on the IRF fabric and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
# Use TFTP to download the image file startup-5700.ipe from the TFTP server to the root directory of the
flash memory on the global active MPU.
<Sysname> tftp 2.2.2.2 get startup-5700.ipe
# Back up the image file startup-5700.ipe to startup-5700-backup.ipe.
<Sysname> copy startup-5700.ipe startup-5700-backup.ipe
Figure 35:
131