Using Ftp To Upgrade Comware Software Through The Management Ethernet Port - HP 10500 Series Configuration Manual
Hide thumbs
Also See for 10500 Series:
- Security configuration manual (596 pages) ,
- Configuration manual (512 pages) ,
- Specifications (42 pages)
Table of Contents
Advertisement
Enter your choice(0-5):2
6.
In the Ethernet submenu, enter 2 to download the specified image file to the device.
Loading.....................................................................
............................................................................
............................................................................
.................................................Done.
227301376 bytes downloaded!
Image file 10500-CMW710-BOOT-R7169P01.bin is self-decompressing...
Saving file flash:/10500-CMW710-BOOT-R7169P01.bin ..........................
........................................................Done.
Image file 10500-CMW710-SYSTEM-R7169P01.bin is self-decompressing...
Saving file flash:/10500-CMW710-SYSTEM-R7169P01.bin ........................
............................................................................
............................................................................
............................................................................
............Done.
After the file transfer is complete, the Ethernet submenu appears again. You can choose other
options as required.
Using FTP to upgrade Comware software through the
management Ethernet port
In this example, the device acts as the FTP client.
To upgrade Comware software through the management Ethernet port:
1.
Connect the device to the intended FTP server through the device's management Ethernet port and
obtain the IP address of the intended TFTP server. Connect your terminal to the device's console
port.
You can use the same PC for the two purposes.
2.
On the intended FTP server, run FTP server, specify the working path for software upgrade, and
configure an FTP user account.
3.
Run the terminal emulation program on the terminal, reboot the device, and enter the
EXTENDED-BOOTWARE menu.
4.
Perform steps
through the management Ethernet
4
to
6
in the procedure described in
port."
"Using TFTP to upgrade Comware software
290
Advertisement
Table of Contents
Troubleshooting
