Examples Of Using Install Commands For Issu On A Standalone Device; Feature Upgrade Example - HP 10500 Series Configuration Manual

flash:/5700-boot.bin
flash:/5700-system.bin
flash:/5700-feature1-d2404.bin
Active packages on chassis 101 slot 0:
flash:/5700-boot.bin
flash:/5700-system.bin
flash:/5700-feature1-d2404.bin
Examples of using install commands for ISSU on a
standalone device

Feature upgrade example

Upgrade requirements
As shown in
1.
Upgrade the feature from R0201 to R0202. The two versions are compatible.
Figure 43 Network diagram
Upgrade procedure
# Download the feature1-r0202.ipe file from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r0202.ipe
% Total
100 256
Writing file...Done.
# Decompress the .ipe file.
<Sysname> install add flash:/feature1-r0202.ipe flash:/
Verifying the file flash:/feature1-r0202.ipe on slot 0...Done.
Decompressing file feature1-r0202.bin to
flash:/feature1-r0202.bin.......................Done.
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/feature1-r0201.bin
Active packages on slot 1:
Figure 43, the device has two MPUs. The active MPU is in slot 0. The standby MPU is in slot
% Received % Xferd
100 256 0
Average Speed
Dload Upload
0 764 0 --:--:-- --:--:-- --:--:--
186
Time Time Time
Total Spent Left
Current
Speed
810