HP 10500 Series Configuration Manual page 269

For example, the boot image file main.bin has the M attribute and the boot image file update.bin has the
B attribute. If you assign the M attribute to update.bin, update.bin will have both the M and B attributes
(M+B), and the file attribute of main.bin will change to N/A.
To change the attribute of Comware software images:
1. Enter 3 in the File Control submenu.
Enter your choice(0-5): 3
'M' = MAIN
============================================================================
|NO. Size(B)
|1 40095744
|01.bin
|2 294388736 Aug/08/2014 11:27:50 M
|9P01.bin
|0 Exit
============================================================================
Note:Select .bin files. One but only one boot image and system image must
be included.
Enter file No.(Allows multiple selection):
2. Enter the numbers of the files you are working with.
Enter file No.(Allows multiple selection):1
Enter another file No.(0-Finish choice):2
Enter another file No.(0-Finish choice):0
You have selected:
flash:/10500-cmw710-boot-R7169P01.bin
flash:/10500-cmw710-system-R7169P01.bin
Modify the file attribute:
============================================================================
|<1>+Main
|<2>+Backup
|<0> Exit
============================================================================
Enter your choice(0-2):
3. Enter a number in the range of 1 to 2 to add a file attribute for the files. For example, enter 2 to
assign the B attribute to the files.
Enter your choice(0-2):2
Set the file attribute success!
Deleting a file
When a storage medium does not have sufficient space, you can delete unused files to free the storage
space.
1. Enter 4 in the FILE CONTROL submenu.
Enter your choice(0-5): 4
Deleting the file in flash:
'M' = MAIN
'B' = BACKUP
Time
Aug/08/2014 11:16:57 M
'B' = BACKUP
259
'N/A' = NOT ASSIGNED
Type Name
flash:/10500-cmw710-boot-R7169P|
flash:/10500-cmw710-system-R716|
'N/A' = NOT ASSIGNED
|
|
|
|
|
|
|