HP 10500 Series Configuration Manual page 279

Option
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default
Configuration
<6> Skip Current System
Configuration
<7> BootWare Operation Menu
<8> Skip Authentication for
Console Login
<9> Storage Device Operation
<0> Reboot
Task
Download files with XMODEM and
upgrade the Comware software
through the console port.
Download files with FTP or TFTP and
upgrade the Comware software
through the management Ethernet
port.
•
Display files on the current
storage medium.
•
Set a software image file as the
primary or backup startup
Comware software image file.
•
Delete files to free storage
space.
Restore the factory-default
configuration.
Skip the configuration file at the
next startup.
This option is not available if
password recovery capability is
disabled.
Back up, recover, and upgrade the
BootWare image.
Enable console login without
authentication.
This is a one-time operation and
takes effect only for the first system
boot or reboot after you choose this
option.
This option is not available if
password recovery capability is
disabled.
Set the storage medium from which
the MPU will start up.
Set the storage medium where file
operations are performed. This
storage medium is referred to as the
current storage medium" in this
chapter.
Reboot the device.
269
Reference
Upgrading Comware software
through the console port
Upgrading Comware software
through the management Ethernet
port
Managing files
Restoring the factory-default
configuration
Skipping the configuration file at
the next startup
Managing the BootWare image
Skipping console login
authentication
Managing storage media
N/A