Displaying And Maintaining Software Image Settings; Non-Issu Software Upgrade Example (For Standalone Mode); Network Requirements - HP 10500 Series Configuration Manual

Step
3. Save the running
configuration.
4. Reboot the PEX.
Displaying and maintaining software image
settings
Execute display commands in any view and execute reset commands in user view.
Task
Display current software images and startup
software images (in standalone mode).
Display current software images and startup
software images (in IRF mode).
Display the PEX startup software images on the
parent device.
Clear the PEX startup software image list on the
parent device.
Non-ISSU software upgrade example (for
standalone mode)

Network requirements

As shown in
1.
Use the file startup-a2105.ipe to upgrade software images for the device.
Figure 33 Network diagram
TFTP client
1.1.1.1/24
Device
Command
save
reboot chassis chassis-number slot
slot-number
Figure 33, the device has two MPUs: one active MPU in slot 0 and one standby MPU in slot
Internet
Remarks
This step ensures that any
configuration you have made can
survive a reboot.
Specify the PEX virtual chassis number
for the chassis-number argument.
Specify the PEX virtual slot number for
the slot-number argument.
The PEX device reboots with the new
startup images.
Command
display boot-loader [ slot slot-number ]
display boot-loader [ chassis chassis-number [ slot
slot-number ] ]
display boot-loader pex [ pex-model ]
reset boot-loader pex pex-model
TFTP server
2.2.2.2/24
128