HP 10500 Series Configuration Manual page 74

Task
Display the source
address or interface for
outgoing Telnet packets
when the device acts as a
Telnet client.
Release a user line.
Lock the current user line.
Send messages to user
lines.
Command
display telnet client
free line { num1 | { aux | vty } num2 }
lock
send { all | num1 | { aux | vty }
num2 }
64
Remarks
N/A
Multiple users can log in to the device to
simultaneously configure the device.
When necessary, you can execute this
command to release some connections.
You cannot use this command to release
the connection you are using.
By default, the system does not lock any
user lines.
This command is not supported in FIPS
mode.
N/A