Feature Upgrade To An Incompatible Version - HP 10500 Series Configuration Manual

flash:/feature1-a0042.bin
Active packages on chassis 2 slot 8:
flash:/boot-a0041.bin
flash:/system-a0041.bin
flash:/feature1-a0042.bin
Active packages on chassis 2 slot 12:
flash:/boot-a0041.bin
flash:/system-a0041.bin
flash:/feature1-a0042.bin
Active packages on chassis 100 slot 0:
flash:/5700-boot.bin
flash:/5700-system.bin
flash:/5700-feature1-d2403.bin
Active packages on chassis 101 slot 0:
flash:/5700-boot.bin
flash:/5700-system.bin
flash:/5700-feature1-d2403.bin

Feature upgrade to an incompatible version

Upgrade requirements
As shown in
is connected only to the master. PEX 2 is connected to both parent devices.
In the parent fabric:
The master has two MPUs (active in slot 0 and standby in slot 1) and two LPUs (in slot 8 and in slot
•
12).
• The subordinate member has one MPU (in slot 0) and one LPU (in slot 8).
Upgrade the feature as follows:
• From a0041 to the incompatible version a0043 on the parent IRF fabric.
From d2402 to the incompatible version d2404 on the PEXs.
•
Figure 42 Network diagram
Figure 42, the eIRF system contains a two-chassis parent fabric and two 5700 PEXs. PEX 1
182