Bootware Shortcut Keys - HP 10500 Series Configuration Manual

Table 38 Error messages
Error message
Invalid address.
Invalid length
Invalid value.
The value not fount.

BootWare shortcut keys

BootWare provides the shortcut keys in
Table 39 BootWare shortcut keys
Shortcut
keys
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+F
Ctrl+T
Ctrl+Y
Ctrl+Z
Description
The start or end address is beyond the memory space or the end address is lower
than the start address.
The entered memory length is so great that the calculated end address is beyond
the memory space.
No value is provided at the prompt Enter the value to search for: before Enter is
pressed.
The specified value is not found in the specified memory space, or the length of the
specified value is not valid because it is not a multiple of 4 bytes.
Prompt message
Press Ctrl+B to access
EXTENDED-BOOTWARE MENU...
Please Start To Transfer File, Press <Ctrl+C> To
Exit.
Info: Press Ctrl+C to abort or return to
EXTENDED ASSISTANT MENU.
Press Ctrl+D to access BASIC-BOOTWARE
MENU...
Ctrl+D = Quit
Ctrl+F: Format File System
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Table 39.
Function
Accesses the EXTENDED-BOOTWARE menu
while the device is starting up.
Stops the ongoing file transfer and exits the
current operation interface.
Returns to the EXTENDED ASSISTANT menu. If
the system is outputting the result of an
operation, this shortcut key combination aborts
the display first.
Accesses the BASIC-BOOTWARE menu.
Exits the parameter settings menu.
Formats the current storage medium.
Starts a five-step RAM test.
This RAM test is intended for memory
troubleshooting. HP recommends not
performing this test.
Starts a nine-step RAM test.
This RAM test is intended for memory
troubleshooting. HP recommend not
performing this test.
Accesses the EXTENDED ASSISTANT menu
from the EXTENDED-BOOTWARE menu.
284
IMPORTANT:
IMPORTANT: