HP 10500 Series Configuration Manual page 233

7. Assign user roles to the
schedule.
8. Specify an execution
time table for the
non-periodic schedule.
To configure a periodic schedule for the device:
Step
1. Enter system view.
2. Create a job.
3. Assign a command to
the job.
4. Exit to system view.
5. Create a schedule.
6. Assign a job to a
schedule.
7. Assign user roles to the
schedule.
user-role role-name
•
Specify the execution date and
time:
time at time date
•
Specify the execution days and
time:
time once at time [ month-date
month-day | week-day
week-day&<1-7> ]
•
Specify the execution delay time:
time once delay time
Command
system-view
scheduler job job-name
command id command
quit
scheduler schedule schedule-name
job job-name
user-role role-name
223
schedule. The jobs will be executed
concurrently.
By default, a schedule has the user
role of the schedule creator.
You can assign up to 64 user roles to
a schedule. A command in a
schedule can be executed if it is
permitted by one or more user roles
of the schedule.
By default, no execution time is
specified for a schedule.
Executing commands clock
datetime, clock summer-time, and
clock timezone does not change the
execution time table that is already
configured for a schedule.
Remarks
N/A
By default, no job exists.
By default, no command is assigned
to a job.
You can assign multiple commands
to a job. A job with a smaller ID will
be executed first.
To assign a command (command A)
to a job, you must first assign the job
the command or commands for
entering the view of command A.
N/A
By default, no schedule exists.
By default, no job is assigned to a
schedule.
You can assign multiple jobs to a
schedule. The jobs will be executed
concurrently.
By default, a schedule has the user
role of the schedule creator.
You can assign up to 64 user roles to
a schedule. A command in a
schedule can be executed if it is
permitted by one or more user roles
of the schedule.