HP 10500 Series Configuration Manual page 166

Version:
7.1.045-Release 7168
Version compatibility list:
7.1.045-Release 7168
Version dependency system list:
7.1.045-Release 7168
Chassis Slot
1 0
1 1
1 3
2 0
2 1
2 3
3 0
3 1
3 3
4 0
4 1
4 3
The output shows that service upgrade is recommended. The feature module will be rebooted during the
upgrade.
# Disable automatic rollback.
<Sysname> system-view
[Sysname] issu rollback-timer 0
# Enable link-aggregation traffic redirection.
[Sysname] link-aggregation lacp traffic-redirect-notification enable
# Enable the IRF bridge MAC address to be permanent.
[Sysname] irf mac-address persistent always
# Set the physical state change suppression interval to 0 on the interfaces.
[Sysname] interface gigabitethernet1/3/0/1
[Sysname-GigabitEthernet1/3/0/1] link-delay 0 mode updown
[Sysname-GigabitEthernet1/3/0/1] quit
[Sysname] interface gigabitethernet2/3/0/1
[Sysname-GigabitEthernet2/3/0/1] link-delay 0 mode updown
[Sysname-GigabitEthernet2/3/0/1] quit
[Sysname] interface gigabitethernet3/3/0/1
[Sysname-GigabitEthernet3/3/0/1] link-delay 0 mode updown
[Sysname-GigabitEthernet3/3/0/1] quit
[Sysname] interface gigabitethernet4/3/0/1
[Sysname-GigabitEthernet4/3/0/1] link-delay 0 mode updown
[Sysname-GigabitEthernet4/3/0/1] quit
[Sysname] quit
# Upgrade the feature on subordinate member 2.
<Sysname> issu load file feature flash:/soft-version2.bin chassis 2
Upgrade Way
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
Service Upgrade
156