Verifying The Configuration - HP 10500 Series Configuration Manual

# Specify startup images files for the PEX-5700 switch to load from its local medium. Specify
startup-5700.ipe as the main startup image file and startup-5700-backup.ipe as the backup startup
image file.
<Sysname> boot-loader file flash:/startup-5700.ipe chassis 110 slot 0 main
<Sysname> boot-loader file flash:/startup-5700-backup.ipe chassis 110 slot 0 backup
<Sysname> boot-loader file flash:/startup-5700.ipe chassis 120 slot 0 main
<Sysname> boot-loader file flash:/startup-5700-backup.ipe chassis 120 slot 0 backup
# Verify the startup image settings on the PEX-5700 switch.
<Sysname> display boot-loader
# Specify startup-5700.ipe as the PEX startup image file for the PEX-5700 switch to load from the parent
device.
<Sysname> boot-loader pex PEX-5700 file ipe flash:/startup-5700.ipe
# Verify the PEX startup image settings on the parent device for the PEX-5700 switches.
<Sysname> display boot-loader pex
# Reboot the PEXs to complete the upgrade.
<Sysname> reboot chassis 110 slot 0
<Sysname> reboot chassis 120 slot 0

Verifying the configuration

# Verify that the PEXs are running the correct software.
<Sysname> display version
132