Managing Directories; Displaying Directory Information; Displaying The Current Working Directory; Changing The Current Working Directory - HP 10500 Series Configuration Manual

Use the following commands in user view:
Task
Calculate the digest of a file by using the SHA-256 algorithm.
Calculate the digest of a file by using the MD5 algorithm.

Managing directories

CAUTION:
To avoid file system corruption, do not perform the following tasks during file operations:
Installing or removing storage media.
•
• Performing an active/standby switchover in standalone mode.
Performing a switchover between the global active MPU and a global standby MPU in IRF mode.
•
You can create, display, or delete a directory, and display or change the current working directory.
Before you create or delete a directory on a USB disk, make sure the disk is not write protected.

Displaying directory information

Perform this task in user view.
Task
Display directory or file information.

Displaying the current working directory

Perform this task in user view.
Task
Display the current working directory.

Changing the current working directory

Perform this task in user view.
Task
Change the current working directory.

Creating a directory

Perform this task in user view.
Command
sha256sum file-url
md5sum file-url
Command
dir [ /all ] [ file-url | /all-filesystems ]
Command
pwd
Command
cd { directory | .. | / }
95