Step
2.
Activate images.
Installing patch images
You can perform this task on a standalone device, an IRF fabric, or an eIRF system.
If a system image has multiple versions of patch images, you only need to install the latest version. You
do not need to uninstall older patch images before you install a new patch image.
Perform this task in user view.
Task
Activate patch images.
Uninstalling feature or patch images
The uninstall operation only removes images from the current software image list. For the change to take
effect after a reboot, you must perform a commit operation to remove the images from the main startup
image list.
Uninstalled images are still stored on the storage medium. To permanently remove the images, execute
the install remove command. For more information, see
Boot and system images cannot be uninstalled.
Uninstalling feature images
Perform this task in user view.
Task
Deactivate feature
images.
Command
•
In standalone mode:
install activate { boot filename |
system filename | feature
filename&<1-30> } * slot slot-number
•
In IRF mode:
install activate { boot filename |
system filename | feature
filename&<1-30> } * chassis
chassis-number slot slot-number
Command
•
In standalone mode:
install activate patch filename slot
slot-number
•
In IRF mode:
install activate patch filename chassis
chassis-number slot slot-number
Command
•
In standalone mode:
install deactivate feature
filename&<1-30> slot slot-number
•
In IRF mode:
install deactivate feature
filename&<1-30> chassis
chassis-number slot slot-number
142
Remarks
The device does not support the
boot filename or system filename
option.
To upgrade a PEX, specify its
virtual chassis number for the
chassis-number argument. The
slot-number argument is fixed at 0.
Remarks
To patch a PEX, specify its virtual
chassis number for the
chassis-number argument. The slot
number is fixed at 0 for the PEX.
"Deleting inactive software
Remarks
To deactivate feature images on a
PEX, perform the following tasks:
•
Specify its virtual chassis
number for the chassis-number
argument.
•
Specify its virtual slot number
for the slot-number argument.
The slot number is fixed at 0 for
the PEX.
images."