Configuring Password Authentication For Console/Aux Login (Not Supported In Fips Mode); Configuring Scheme Authentication For Console/Aux Login - HP 6125XLG Configuration Manual

Blade switch fundamentals configuration guide
Table of Contents

Advertisement

The next time you attempt to log in through the console or AUX port, you do not need to provide any
username or password.
Configuring password authentication for console/AUX login
(not supported in FIPS mode)
Step
1.
Enter system view.
2.
Enter console/AUX user
interface view.
3.
Enable password
authentication.
4.
Set a password.
5.
Assign a user role.
The next time you attempt to log in through the console or AUX port, you must provide the configured
login password.

Configuring scheme authentication for console/AUX login

Step
1.
Enter system view.
2.
Enter console/AUX
user interface view.
Command
system-view
user-interface { aux | console }
first-number [ last-number ]
authentication-mode password
set authentication password
{ hash | simple } password
user-role role-name
Command
system-view
user-interface { aux | console }
first-number [ last-number ]
23
Remarks
N/A
N/A
The defaults are as follows:
Console user
interface—Authentication is disabled.
AUX user interface—Authentication is
disabled if the device started up with
the default configuration file, and
password authentication is enabled if
the device started up with empty
configuration.
For more information about empty
configuration and the default
configuration file, see
configuration
files."
By default, no password is set.
By default, a console login user is
assigned the user role network-admin.
Remarks
N/A
N/A
"Managing

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents