Updating The Extended Bootware Segment; Updating The Entire Bootware; Running The Primary Extended Bootware Segment - HP 10500 Series Configuration Manual

NOTE:
The baud rate change is a one-time operation. The baud rate will restore to the default (9600 bps) at
reboot. To establish a console session with the device after a reboot, you must change the baud rate setting
on the configuration terminal to 9600 bps.

Updating the extended BootWare segment

If the extended BootWare segment is corrupt, enter 2 in the BASIC-BOOTWARE menu to update it.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Download successfully!
329344 bytes downloaded!
Updating Extended BootWare? [Y/N]Y
Updating Extended BootWare...............Done.

Updating the entire BootWare

To update the entire BootWare, enter 3 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 3
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Download successfully!
329344 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare...............Done.
Updating Extended BootWare? [Y/N]Y
Updating Extended BootWare...............Done.

Running the primary extended BootWare segment

To bootstrap the Comware software images with the primary extended BootWare segment, enter 4 in the
BASIC-BOOTWARE menu.
Enter your choice(0-5): 4
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.........Done.
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU Clock Speed
Memory Type
BootWare, Version 1.03
: Jul 19 2014
: XLP208 Rev A2
: 1000MHz
: DDR3 SDRAM
249
*
*
*