Instructions for use
4.2.6 Changing the water
To achieve the best possible washing results, it is important that the water is
changed frequently.
NOTE: The water in the wash tank must be changed regularly, otherwise foam
will start to form and the washing results will deteriorate. If the filters are clogged
with foam or if foam comes out of the waste pipe, the water must be changed im-
mediately.
The machine has an alarm which indicates when the water is dirty and must be
changed. The alarm is set off after a preset number of wash cycles. LED (4) flash-
es to indicate that the alarm has been activated. The alarm can be reset by press-
ing button (7). The machine can also be locked to prevent it from being used any
further when the water change alarm is triggered. The setting must be changed
by a service engineer in the machine's software.
WD-18CW
1
P1
2
P2
P3
3
4
5
18_01
WD-18CW
10
9
8
7
6
11
12
13
14
34
Rev. 3,0 (201802)