Table of Contents
Advertisement
Instructions for use
4.3.2 Machine with double doors
Machines with double doors have a programme for cleaning the inside of the
doors manually. Start by cleaning the doors and then clean and empty the ma-
chine.
•
•
•
•
•
•
•
•
•
4.3.3 Cleaning the outside of the machine
Wipe the outside of the machine with a soft, damp cloth.
4.3.4 Cleaning the condensation battery
NOTE! Cleaning the condensate battery should be done 1-2 times per year.
NOTE! When cleaning the condensation battery and the bottom of the battery
box, do not flush with more water than the drain under the battery can remove it
from the machine. Rinse with hot water and normal water pressure. Do not flush
directly against the fan motor. The electric motor may be damaged if flooded with
water under high pressure.
The safety valve should be checked when cleaning. This is done by turning it.
WD-18CW
The machine must be in pause mode. No wash programme must be select-
ed. Press the programme button with the lit LED (2) until the LED goes out.
Press and hold the diagnostics button (9) for a few seconds until SET-
POINTS - DIAGNOSIS - RELAY TEST - STATISTICS appears on the dis-
play. Press button (9). The cursor moves between the different options.
Hold button (9) down until TIME & DATE - LANGUAGE - OTHER appears
on the display. Move the cursor to OTHER.
Press button (8). MANUAL CLEANING NO YES appears on the display.
Hold button (8) down until the cursor moves to YES.
Press button (13). One door closes. Clean the inside of the closed door.
Press button (13) again to open the clean door and close the other door.
Clean the inside of the closed door. Open the door using button (13) and
leave both doors open.
Exit the diagnostics function by pressing and holding down button (9) until
LED (3) goes out.
Turn off the machine. Press button (6).
Clean the outer surfaces of the machine.
Rinse the tank (23) with hot water.
37
Rev. 3,0 (201802)
Advertisement
Table of Contents
