Table of Contents
Advertisement
Operating instructions
4.2.4 Changing the water
To achieve the best possible washing results, it is important that the water is
changed frequently. For normally soiled items, the water should be changed after
around 50 washes. However, always change the water in the event of foam
problems in the tank.
Machines without a drain pump
•
•
•
•
•
•
•
Machines with a drain pump (option)
N.B.! The hood/door must be open when the drain pump is running.
•
•
•
•
•
•
•
WD-6C
Turn the knob (8) to position 0.
Open the hood.
Remove the tank filters (9) from the machine.
Empty the water from the machine by removing the level pipe (10).
Put all of the loose components back in position when the tank is empty.
Turn the knob (8) to position (6).
Close the hood and the machine will refill.
Turn the knob (7) to position 0.
Open the hood.
Remove the tank filters (11) and the level pipe (12). Leave the hood open.
Turn the knob (7) in the direction of the symbol (6), wait for approximately
3 seconds, continue to the symbol (9) and hold in position until the drain
pump starts and runs for 2 minutes and 20 seconds.
When the machine is empty, refit the level pipe (12) and tank filters (11).
Turn the knob (7) first to position 0 and then to position (6).
Close the hood and the machine will refill.
33
Rev. 7.0 (202202)
Advertisement
Table of Contents
