Installation
3.3 Transport and storage
Always transport the machine in an upright position.
Take care during transport, as there is a risk of the machine tipping over. NOTE:
The machine must not be transported without a pallet or other support. Some form
of support beam must always be used along the sides of the machine during
transport. otherwise the machine may be damaged. When transporting the ma-
chine without a normal wooden pallet, always check that none of the components
underneath the machine can be damaged.
A=Pumps
B=Spacers
If the machine is not being installed immediately, it must be stored in a frost-free
area where the air is dry.
3.3.1 Unpacking
Check against the delivery note that all the units have been delivered.
Remove the packing material. Inspect the machine for any transport damage.
WD-18CW
10
Rev. 3,0 (201802)