Related Manuals for Wexiodisk WD-4S
Summary of Contents for Wexiodisk WD-4S
- Page 1 DISHWASHER WD-4S (translation of the original documentation) Read the manual before using the machine! Installation and user manual S/N: (En) Valid from: 201912 Rev.: 5.0...
-
Page 3: Table Of Contents
WD-4S Rev. 5.0 (201912) 1. General instructions ................ 1 1.1 Symbols used ....................2 1.2 Machine rating ....................3 1.3 Checking that the machine and manual correspond ........3 1.4 EU Declaration of Conformity ................4 2. Safety instructions ................5 2.1 General information .................. - Page 4 WD-4S Rev. 5.0 (201912) 3.5 Connections ....................15 3.5.1 Electrical connection ................16 3.5.2 Water connection, regardless of any options .......... 18 3.5.3 Drain/waste pipe ..................18 3.5.4 Ventilation ....................19 3.5.5 Detergent and drying agent ..............19 3.5.6 Equipment package for the machine ............21 3.5.7 Setting / adjustment of flows ..............
-
Page 5: General Instructions
WD-4S Rev. 5.0 (201912) General instructions 1. General instructions Read the instructions in this manual carefully as they contain important informa- tion regarding the correct, effective and safe installation, use and servicing of the machine. Service personnel should have access to all documentation for the ma- chine. -
Page 6: Symbols Used
WD-4S Rev. 5.0 (201912) General instructions 1.1 Symbols used This symbol warns of situations where a safety risk may arise. The instructions given should be followed in order to prevent injury and dangerous situations. This symbol on a machine part warns of electrical equipment. The machine must be entirely non-live during servicing, turn off the power at the power switch and if required, the switch should be locked to prevent unintentional operation. -
Page 7: Machine Rating
WD-4S Rev. 5.0 (201912) General instructions 1.2 Machine rating The machine has two rating plates, one of which is placed at the bottom of one side of the machine and the other in the electrical cabinet. The technical informa- tion on the plates is also included on the machine's wiring diagram. The various... -
Page 8: Eu Declaration Of Conformity
WD-4S Rev. 5.0 (201912) General instructions 1.4 EU Declaration of Conformity A so-called EU Declaration of Conformity is provided on delivery of the machine. CE_16_2 Contact details of the manufacturer (Wexiödisk AB, Mårdvägen 4, SE- 35245 Växjö, SWEDEN, Tel.: +46 470 771200, Fax: +46 470 23752, E- mail: wexiodisk@wexiodisk.com). -
Page 9: Safety Instructions
Warranty repairs must be performed by an authorised company. Contact an authorised service company to draw up a programme of preventive care and maintenance. For authorised service companies, please see www.wexiodisk.com or contact Wexiödisk AB. • The regular checks described in the manual must be carried out in accord-... -
Page 10: Transport
WD-4S Rev. 5.0 (201912) Safety instructions 2.2 Transport Handle the machine with care during unloading and transport; there is a risk of it tipping over. Never lift or move the machine without using the wooden packaging to support the stand. -
Page 11: Risk Of Slipping
WD-4S Rev. 5.0 (201912) Safety instructions 2.5.3 Risk of slipping The floor should be kept clean and dry to eliminate any risk of slipping. Mop up any water and leftover food that has been spilt. 2.5.4 Sounds The machine is not silent during operation, see TECHNICAL SPECIFICATIONS. -
Page 12: Installation Instructions
WD-4S Rev. 5.0 (201912) Installation instructions 3. Installation instructions Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. 3.1 General information Read these instructions carefully, as they contain important information regarding the correct installation method. • Machines must NOT be stacked on top of each other! •... -
Page 13: Power Supply
WD-4S Rev. 5.0 (201912) Installation instructions 3.2.3 Power supply Power supply connections are made by qualified personnel in a way that complies with local and national regulations. The machine’s capacity requirements are stip- ulated in TECHNICAL SPECIFICATIONS. 3.2.4 Water Water connections are made by qualified personnel in a way that complies with local and national regulations. -
Page 14: Transport And Storage
WD-4S Rev. 5.0 (201912) Installation instructions 3.3 Transport and storage Always transport the machine in an upright position. Take care during transport, as there is a risk of tipping. NB: The machine must not be transported without a pallet or other support. Some form of support beam must always be used along the sides of the machine during transport. -
Page 15: Installation
WD-4S Rev. 5.0 (201912) Installation instructions 3.4 Installation 3.4.1 Preparing for the installation Check that there is sufficient room for the machine at the installation location. • Check that correct connections are available for water, electricity, drainage and possibly steam at the installation location. See TECHNICAL SPECIFI- CATIONS. - Page 16 WD-4S Rev. 5.0 (201912) Installation instructions 11454_ABD Machine for built-in or freestanding installation...
- Page 17 WD-4S Rev. 5.0 (201912) Installation instructions 11454_28595 Machine with stand (option) containing shelves or lockable cabinet...
- Page 18 WD-4S Rev. 5.0 (201912) Installation instructions Sink-mounted machine...
-
Page 19: Connections
WD-4S Rev. 5.0 (201912) Installation instructions 3.5 Connections 11454_AB Connections on the machine Water connection, external thread Drain connection, spiral hose Electrical connection Non-return valve / Vacuum valve In the following chapter, figures are given in brackets to clarify what needs to be... -
Page 20: Electrical Connection
WD-4S Rev. 5.0 (201912) Installation instructions 3.5.1 Electrical connection Information about electrical connections is available on the machine’s wiring dia- gram which is provided on delivery. Store the diagrams in the plastic pocket, lo- cated in the electrical cabinet, even after installation. - Page 21 WD-4S Rev. 5.0 (201912) Installation instructions If the voltage is according to option 2 do the following: The connection cable in the electrical cabinet: Remove phases L2 (black) and L3 (grey) from the terminal blocks in X10 in the machine. Cut off the wires and insulate these with end sleeves (en- closed with the machine).
-
Page 22: Water Connection, Regardless Of Any Options
WD-4S Rev. 5.0 (201912) Installation instructions 3.5.2 Water connection, regardless of any options • A shut-off cock must be installed on the incoming pipe. • It is important that the water supply has sufficient pressure to ensure the correct flow of water to the machine. The required water flow and pressure can be found in the TECHNICAL SPECIFICATIONS. -
Page 23: Ventilation
WD-4S Rev. 5.0 (201912) Installation instructions 3.5.4 Ventilation The machine’s heat load for the room is stipulated in TECHNICAL SPECIFICA- TIONS. 3.5.5 Detergent and drying agent • Check what your machine is equipped with, which depends on the model, machine type and country. - Page 24 WD-4S Rev. 5.0 (201912) Installation instructions If equipment for a different type of detergent is used, it should preferably be put on the wall behind the machine to avoid holes being drilled unnecessarily in the machine. The detergent hose is connected to the pipe (A) at the front end of the chemical washing tank (see the figure below).
-
Page 25: Equipment Package For The Machine
WD-4S Rev. 5.0 (201912) Installation instructions 3.5.6 Equipment package for the machine The machine can be equipped with a number of different packages with various contents. Check what your machine is equipped with. The various equipment packages place no specific demand on the installation. -
Page 26: Trial Operation
WD-4S Rev. 5.0 (201912) Installation instructions 3.6 Trial operation Prepare the machine for trial operation with the help of OPERATING INSTRUC- TIONS. The instructions describe the measures that must be taken to prepare the machine for operation. 3.6.1 Start-up schedule This should be completed when the machine is started up and used. -
Page 27: Documentation
WD-4S Rev. 5.0 (201912) Installation instructions 5. Run a number of washes complete with loads and check: • There are no water leaks • The door switch works • The water temperatures are maintained • The washed items are clean •... -
Page 28: Operating Instructions
WD-4S Rev. 5.0 (201912) Operating instructions 4. Operating instructions Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. This chapter describes what must be done with the machine: • Before washing • How washing should be performed •... -
Page 29: Before Washing
WD-4S Rev. 5.0 (201912) Operating instructions 4.1 Before washing 4.1.1 Machine design... -
Page 30: Preparations Before Filling
WD-4S Rev. 5.0 (201912) Operating instructions Button for programme P1 Button for programme P2 Button for programme P3 Display Button for changing water Button for emptying machine with internal cleaning Button for ON/OFF. Acknowledgement of alarm, green LED for “ready for wash”... -
Page 31: Filling And Heating The Machine
WD-4S Rev. 5.0 (201912) Operating instructions 4.1.3 Filling and heating the machine You can see what the machine is doing on the machine’s panel. WD-U_01 Machine’s display A= The centre of the display shows what the machine is doing and what the ma- chine will do B=The left side of the display shows the “wash”... - Page 32 WD-4S Rev. 5.0 (201912) Operating instructions • Start the machine using the ON/OFF button (7) on the panel. • Close the door. • If the following images are shown on the display, the door must be opened and closed in order to start filling the machine.
-
Page 33: Washing
WD-4S Rev. 5.0 (201912) Operating instructions 4.2 Washing Remember that there is a certain risk of tipping, e.g. when a heavier load is placed at the outer edge of the door in the open position. 4.2.1 Symbols on the machine’s display WD-U_04 Machine’s display... -
Page 34: Positioning Of Dishware In Baskets
WD-4S Rev. 5.0 (201912) Operating instructions 4.2.2 Positioning of dishware in baskets The machine is supplied with washing baskets depending on the equipment level. The washing baskets are used according to the following: The yellow basket is used for side plates, trays, plates, etc. - Page 35 WD-4S Rev. 5.0 (201912) Operating instructions Cutlery must therefore be placed in designated baskets before the second wash, the baskets above are placed in the blue basket Basket specially intended for glass (option)
-
Page 36: Selecting A Programme
WD-4S Rev. 5.0 (201912) Operating instructions 4.2.3 Selecting a programme Standard machine The control panel has three programme buttons P1 (1), P2 (2) and P3 (3). • P1=Lightly soiled items (e.g. trays and glassware) • P2=Normal wash (e.g. plates and cups) •... - Page 37 WD-4S Rev. 5.0 (201912) Operating instructions Glass washing dishwasher (option) The control panel has three programme buttons P1 (1), P2 (2) and P3 (3). • P1=Beer glasses • P2=Standard glasses • P3=Wine glasses The washing temperature and chemical washing time for each programme is set on delivery.
- Page 38 WD-4S Rev. 5.0 (201912) Operating instructions Washing temperature and washing time The factory setting for the washing temperature is 60° C. The chemical washing times for each programme are set on delivery to: Standard machine: • 1.0 min. (programme P1) •...
-
Page 39: Washing
WD-4S Rev. 5.0 (201912) Operating instructions 4.2.4 Washing WD-U_02 The machine’s panel • Remove larger food particles by scraping and rinsing the items using a hand shower. The water in the hand shower must not exceed 40°C. Place the items to be washed in the basket. - Page 40 WD-4S Rev. 5.0 (201912) Operating instructions • When the machine has finished washing, a signal sounds and the display shows: A=Standard B=Glass washing (option) • Remove the washing basket and allow the washed items to dry. • Check that the dishes are clean.
- Page 41 WD-4S Rev. 5.0 (201912) Operating instructions Changing the water • To achieve the best possible washing results, it is important that the water is changed frequently. For normally soiled loads, the water should be changed after around 30 washes. However, always change the water in the event of foam problems in the tank.
-
Page 42: After Use - Cleaning
WD-4S Rev. 5.0 (201912) Operating instructions 4.3 After use – Cleaning HACCP is a preventive inspection system to ensure hygiene requirements are met during the washing process and cleaning of the machine. As a result of its design, the machine meets strict hygiene requirements. Regular, thorough clean- ing is also important from a hygiene perspective. -
Page 43: Daily Cleaning
WD-4S Rev. 5.0 (201912) Operating instructions 4.3.2 Daily cleaning Emptying with internal cleaning • Check that the machine is in standby mode. A=Standard B=Glass washing (option) • Open the door. • Remove the tank strainers (9) and the active filter (14) (option). - Page 44 WD-4S Rev. 5.0 (201912) Operating instructions The total number of washes made since the machine was used for the first time is now shown. • Open the door. Check that the washing arms’ (12) and the rinse pipes’ (13) nozzles are clean and that no objects have fallen and become lodged in the machine.
-
Page 45: Cleaning Each Week Or As Required
WD-4S Rev. 5.0 (201912) Operating instructions Externally Wipe the outside of the machine with a soft, damp cloth. • If detergent is used, it must not contain abrasives. Detergents containing abrasives will damage the stainless steel panels. • The exterior of the machine must not be hosed. Water can enter the ma- chine and damage the control panel and electrical equipment. -
Page 46: Operating Problems
WD-4S Rev. 5.0 (201912) Operating instructions 4.3.4 Operating problems Error messages During operation, various alarms or information messages can appear on the panel’s display. There is a distinction between IF and Er alarms. IF alarms can normally be dealt with by the operator. If there is an Er alarm, the service person- nel must be called. - Page 47 WD-4S Rev. 5.0 (201912) Operating instructions CODE CAUSE ACTION Er16 The rinsing temperature is too low before The alarm can be reset by pressing ON/OFF on the pan- final rinsing. The machine continues to el. If the error recurs, contact an authorised service com- the rinsing phase but with a lower temper- pany.
- Page 48 WD-4S Rev. 5.0 (201912) Operating instructions Troubleshooting The following errors can be dealt with by the operator. If the problem persists, contact authorised service personnel. PROBLEMS CAUSE ACTION No indication on the control pan- Power switch off. Switch on the power switch.
- Page 49 WD-4S Rev. 5.0 (201912) Operating instructions When you contact service personnel, you will need to provide the following infor- mation: • Machine type and model. • Machine serial number and date when the machine was installed. • A brief description of the problem. Are any fault codes shown in the dis- play? •...
-
Page 50: Technical Specifications
WD-4S Rev. 5.0 (201912) Technical specifications 5. Technical specifications The manufacturer reserves the right to make changes to the technical data. TECHNICAL DATA Washing pump, M1 (kW) 0.75 Drain pump, M8 (kW) 0.04 Booster pump, M10 (kW) ** 0.37 Booster heater, E41 (kW) (400V) - Page 51 WD-4S Rev. 5.0 (201912) Technical specifications CAPACITY AND OPERATING DATA Total washing time, incl. rinsing time, programme 1 (min) * Total washing time, incl. rinsing time, programme 2 (min) * Total washing time, incl. rinsing time, programme 3 (min) * Total washing time, incl.
- Page 52 WD-4S Rev. 5.0 (201912) Technical specifications WATER, DRAIN AND VENTILATION CONNECTIONS Water quality, hardness (° dH) Hot water connection 50-65° C (external thread) * R¾" Cold water connection, 5–12° C (external thread) (option) R¾" Drain connection, hose (ø mm) **...
Need help?
Do you have a question about the WD-4S and is the answer not in the manual?
Questions and answers
Error code 4