Table of Contents
Advertisement
Operating instructions
4.2.5 Emergency stop
If the machine needs to be stopped during operation for some reason, press
button (13) for an emergency stop.
Before the machine can be restarted, the emergency stop button (13) must be
reset by turning it in the direction of the arrows. The alarm is reset on the touch
panel (14) and the shutter doors are opened. The problem which caused the
emergency stop must be rectified.
Turn the rotating table manually to the home position. The arrows on the rotating
table and sill plate should now be exactly aligned.
4.2.6 Guaranteed final rinse
The temperature of the final rinse water is always correct and the right amount of
rinse water is always used.
If there is an error during the final rinse, this is indicated by an alarm and
information on what must be done.
4.2.7 Changing the water
Use the menu button (10) on the touch panel to access the menu. Select the
program for changing the water and follow the instructions on the touch panel.
It is also possible to change the water manually when the machine is switched off.
To achieve the best possible washing results, it is important that the water is
changed frequently. However, always change the water in the event of foam
problems in the tank.
Recommendations
•
•
•
WD-18CW
Change the water if a large amount of foam forms.
If a large number of items need washing before lunch and relatively few
during the afternoon, change the water directly after the lunchtime wash.
If a large number of items need to be washed after breakfast and after
lunch, change the water twice, both after breakfast and after lunch.
37
Rev. (202211)
Advertisement
Table of Contents
