Table of Contents
Advertisement
Instructions for use
ALARM TEXT
(37)
LOW FLOW DURING
FINAL RINSE
PRESS RESET
(38) HACCP ALARM
NO FLOW DURING
FINAL RINSE
PRESS RESET
(40)
HACCP ALARM
FINAL RINSE DEFECT
PRESS RESET
(42) TIMEOUT WHEN
FILLING TANK
PRESS RESET TO
START FILLING AGAIN
(105) TIMEOUT WHEN
FILLING BREAK TANK
PRESS RESET TO
START FILLING AGAIN
(43)
TIMEOUT WHEN
HEATING TANK
PRESS RESET
(44)
LOW TEMPERATURE
IN TANK
PRESS RESET
(45) HACCP-ALARM
HEATING OF TANK
DEFECT MACHINE
LOCKED
PRESS RESET
(48) HACCP ALARM
HEATING OF BOILER
DEFECT
PRESS RESET
(51) HACCP-LARM
WASHING DETERGENT
FUNCTIONALITY DEFECT
PRESS RESET
(57)
EXTERNAL ALARM
ACTIVATED
PRESS RESET
(58)
TIME TO CHANGE
WATER IN TANK
PRESS RESET
(64) TIME FOR
MAINTANANCE
CONTACT:
WD-18CW
ACTION
Reset the alarm by pressing button (7).
Check that the stopcocks on the incoming water supply are open. Reset the
alarm by pressing button (7).
Check that the stopcocks on the incoming water supply are open. Reset the
alarm by pressing button (7).
Check that the stopcocks on the incoming water supply are open. Check that
the level pipe (22) is closed and that the rubber seal (19) on the level pipe is
sealing with the bottom plate. Reset the alarm by pressing button (7).
Appuyer sur le bouton (7) pour rémettre l'alarme à zéro.
Reset the alarm by pressing button (7).
Reset the alarm by pressing button (7).
Reset the alarm by pressing button (7).
Reset the alarm by pressing button (7).
Check whether the machine is out of detergent. Add detergent. Reset the
alarm by pressing button (7).
Reset the alarm by pressing button (7).
Change the water. Reset the alarm by pressing button (7).
Contact service personnel. Reset the alarm by pressing button (7).
40
Rev. 3,0 (201802)
Advertisement
Table of Contents
