Table of Contents
Advertisement
General information
1.2 Symbols on the dishwasher
This symbol on a machine part warns of electrical equipment. The machine must
be entirely non-live during service, turn off the power at the power switch and if
required, the switch should be locked to prevent unintentional operation. The
component may only be removed by a qualified electrician.
The machine's electronics are sensitive to electrostatic discharge (ESD), which is
why a static electricity wristband must be used when handling the electronics at
all times.
1.2.1 Machine marking
The machine has two rating plates, one of which is placed at the bottom of one
side of the machine and the other in the electrical cabinet. The technical informa-
tion on the plates is also included on the machine's wiring diagram. The various
rating fields show:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.3 Checking that the machine and the manual correspond
Check that the type description on the rating plate corresponds with the type de-
scription on the front of the manual. If manuals are missing, it is possible to order
new ones from the manufacturer or the local distributor. When ordering new man-
uals, it is important to quote the machine number found on the rating plates.
Type
1
2
S/N:
5
V
9
kW
M
Mårdvägen 4, S-352 45 VÄXJÖ SWEDEN
Machine type
Machine serial number
Year of manufacture
Enclosure protection class
Voltage
Number of phases with or without zero
Frequency
Main fuse
Motor output
Electrical heating output
Max. output
WD-18CW
!
3
6
Hz
7
kW
10
3
Rev. 3,0 (201802)
4
IP
A
8
kW
11
marks_15
Advertisement
Table of Contents
