Table of Contents
Advertisement
Instructions for use
Recommendations
•
•
•
Changing the water
•
•
•
•
•
•
•
•
Emptying the tank.
Turning the level pipe a quarter of a turn.
WD-18CW
Change the water if a large amount of foam forms.
If a large number of items need washing before lunch and relatively few
during the afternoon, change the water directly after the lunchtime wash.
If a large number of items need to be washed after breakfast and after
lunch, change the water twice, both after breakfast and after lunch.
When the doors are open, press button (6) to switch off the power supply.
Take out the filter (18). Rinse it in water.
Turn the level pipe (22) a quarter of a turn to empty the tanks.
If necessary, remove the level pipe and rinse the wash tank with water. Re-
fit the level pipe.
Turn the level pipe back a quarter of a turn until the rubber seal (19) seals
with the bottom plate.
Replace the filter (18).
Press buttons (6), (10) and then (13) to close the doors and start filling the
machine.
Messages indicating the sequence of events appear on the display (1).
35
Rev. 3,0 (201802)
Advertisement
Table of Contents
