Changing The Water - Wexiodisk WD-6 Installation And User Manual

Operating instructions

4.2.8 Changing the water

To achieve the best possible washing results, it is important that the water is
changed frequently. In the case of items subject to normal soiling, the water
should be changed after approximately 50 washes for a WD-6 and WD-7 and
after around 30 washes for a WD-6 DUPLUS and a WD-7 DUPLUS. However,
always change the water in the event of foam problems in the tank.
If IF09 appears on the display, this indicates that the water should be changed.
Machines without a drain pump
• Check that the machine is in P0 mode.
• Open the hood. On machines with automatic hood lift, the hood is opened/
closed with the button (5).
• Remove the tank filter and cover plates (13) and clean them.
• Empty the machine by turning the level pipe (12) anticlockwise.
• When the tank is empty, turn the level pipe (12) clockwise and refit the tank
filters and cover plates (13).
• Close the hood (on machines with automatic hood lift, the hood is opened/
closed with the button (5)) and the machine is refilled.
• Check that the final rinse symbol (3) is lit.
Machines with a drain pump (option)
N.B.! The hood must be open while the drain pump is running and the "Beer
glasses" button (P1) (6) is used to start and stop the drain pump.
• Check that the machine is in P0 mode.
• Open the hood. On machines with automatic hood lift, the hood is opened/
closed with the button (5).
• Remove the tank filter, cover plates (13), level pipe (12) and drain filter (22),
and clean them.
• Press the 0/1 button (9).
• Press the "Beer glasses" button (P1) (6) to start the drain pump. "dP"
appears on the display (2). The display (4) shows the remaining run time
for the drain pump.
• When the tank is empty, refit the level pipe (12), drain filter (22), tank filter
and cover plates (13).
• Press the 0/1 button (9).
• Close the hood (on machines with automatic hood lift, the hood is opened/
closed with the button (5)) and the machine is refilled.
• Check that the final rinse symbol (3) is lit.
Glasstilt
41
Rev. 2.0 (202202)