Table of Contents
Advertisement
Safety instructions
2.3 Installation
The machine is intended for fixed electrical installation.
This symbol on a machine part warns of electrical equipment. The machine must
be entirely non-live during service, turn off the power at the power switch and if
required, the switch should be locked to prevent unintentional operation. The
component may only be removed by a qualified electrician.
The machine's electronics are sensitive to electrostatic discharge (ESD), which is
why a static electricity wristband must be used when handling the electronics at
all times.
Water and steam pipes must only be connected by authorised personnel.
Air, water and steam pipes must be connected in a way that complies with the cur-
rent regulations of the local water supply authority. Check the tightness of the wa-
ter and steam connections before operating the machine.
Make sure that the mains voltage is the same as that indicated on the machine's
rating plate.
For increased safety, it is recommended to equip the installation with a ground
fault circuit interrupter.
2.4 Detergent and drying agent
Only detergent and drying agent intended for industrial dishwashing machines
must be used. Ordinary washing-up liquid must not be used in the machine or for
soaking. Contact your detergent supplier regarding the choice of a suitable deter-
gent.
Be aware of the risk of handling washing and drying agents. Protective gloves and
safety glasses should be used when handling dishwasher detergent. Read the
warning text on the detergent and drying agent containers as well as the deter-
gent supplier's regulations.
WD-18CW
6
Rev. 3,0 (201802)
Advertisement
Table of Contents
