Table of Contents
Advertisement
Operating instructions
4.2.8 Changing the water
Use the menu button on the touch panel to access the menu. Select the program
for changing the water and follow the instructions on the touch panel.
To achieve the best possible washing results, it is important that the water is
changed frequently. However, always change the water in the event of foam
problems in the tank.
Recommendations
•
•
•
4.2.9 Checking the wash result
The dishware should be checked after each wash for:
PROBLEM
Starch spots
Misting
Protein residues
Detergent residues
WD-40BRE
Change the water if a large amount of foam forms.
If a large number of items need washing before lunch and relatively few
during the afternoon, change the water directly after the lunchtime wash.
If a large number of items need to be washed after breakfast and after
lunch, change the water twice, both after breakfast and after lunch.
CAUSES & MEASURES
•
Scraping: Important to remove as much food particles as possible
before washing. This also means that the water in the machine
does not need to be changed as often. Scrape better.
•
Detergent and drying agent dosage: If using liquid detergent and
drying agent, the same make and type should be used. A service
technician should be contacted to rinse the equipment with water
when replacing the detergent and drying agent. The dosing affects
both detergent and drying results of the dishware. The hardness
level of the water affects the consumption of detergent. Contact the
detergent supplier.
•
Temperatures: At incorrect temperatures the dishes will not be
clean. Contact a service technician if you need to change the set
values.
•
Cleaning the machine: Insufficient cleaning of the machine
affects the results of the washing. Ensure better cleaning of the
machine.
•
Soaking: Items with hard dried food. Soak the items in water. Do
NOT use washing-up liquid.
•
Changing the water: How often the water needs to be changed
depends on several factors, such as the number of items being
washed, how well food residue is scraped off the item, how much
detergent there is in the washing water etc. It is therefore important
to continuously check the wash result, which may indicate when it
is time to change the water.
•
Water hardness: If the water used for washing is hard (>10° dH),
a higher concentration of detergent may be needed to ensure the
washed items emerge clean. Contact your detergent supplier!
32
Rev. (202303)
Advertisement
Table of Contents
