Table of Contents
Advertisement
Operating instructions
4.2.6 Guaranteed final rinse
The temperature of the final rinse water is always correct and the right amount of
rinse water is always used.
If there is an error during the final rinse, this is indicated by an alarm and informa-
tion on what must be done.
4.2.7 Changing the water
To achieve the best possible washing results, it is important that the water is
changed frequently. However, always change the water in the event of foam prob-
lems in the tank.
•
•
•
•
•
•
•
A guide to changing the water is also displayed on the panel when the function
for this has been selected. This is done by pressing the menu button
then selecting water change
Recommendations
•
•
•
WD-151E - WD-421E
Open the machine doors.
Remove the filters and filter tray, and clean them.
Locate the emptying bar and empty the tanks by pulling the emptying bar
towards you.
When the tanks are empty, close the level pipe and drain seals by pushing
the emptying bar away from you.
Refit the filters and filter tray.
Close the machine doors.
Refilling of the machine is started by pressing "START" located on the
touch panel
.
Change the water if a large amount of foam forms.
If a large number of items need washing before lunch and relatively few
during the afternoon, change the water directly after the lunchtime wash.
If a large number of items need to be washed after breakfast and after
lunch, change the water twice, both after breakfast and after lunch.
50
touch
.
Rev. 00 (202310)
and
Advertisement
Table of Contents
