Welch Allyn Connex Spot Monitor Service Manual page 77
Hide thumbs
Also See for Connex Spot Monitor:
- Disassembly and reassembly (263 pages) ,
- Directions for use manual (166 pages) ,
- Startup manual (8 pages)
Table of Contents
Advertisement
Service manual
2. With two fingers, press down the bale to secure the LCD flex cable.
3. Apply the Gaff tape (removed during disassembly) to the ferrite and the LCD flex to
hold the ferrite in place. Crease the tape along the side of the ferrite.
Note
Do not allow the tape to touch the board or the ferrite to
touch the end of the flex cable when assembled.
Disassembly and repair 71
Hide quick links:
Advertisement
Table of Contents
