Welch Allyn Connex Spot Monitor Service Manual page 156

150 Appendix
To obtain the severity number, subtract the (facility times 8) value from the PRI value.
The severity number is one of the following:
Severity Number Severity Name
0
1
2
3
4
5
6
7
Sample calculation/interpretation
For each of the sample error logs presented, we can determine the following:
<13>2014-09-26T12:18:45.000+00:00 wa_nibpd[1326]:
NibpManualBpCancelState->Enter
<PRI> = 13
ISODATE = 2014-09-26T12:18:45.000+00:00
MSGHDR = wa_nibpd[1326]:
MSG = NibpManualBpCancelState
Facility = <PRI> ÷ 8 = 13 ÷ 8 = 1.625 = 1 when rounded down = User-level messages
Severity = <PRI> – (Facility x 8) = 13 – (1 x 8) = 13 – 8 = 5 = NOTICE
<150>2014-09-08T05:55:00.000+00:00 wa_spo2nonind[1521]: Code 1,
SPO2 sensor not connected
<PRI> = 150
ISODATE = 2014-09-08T05:55:00.000+00:00
MSGHDR = wa_spo2nonind[1521]:
MSG = Code 1, SPO2 sensor not connected
Facility = <PRI> ÷ 8 = 150 ÷ 8 = 18.75 = 18 when rounded down = Service messages (aka local-2)
Severity = <PRI> – (Facility x 8) = 150 – (18 x 8) = 150 – 144 = 6 = INFO
EMERG
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
Description
A panic condition
A condition that should be corrected immediately
Critical conditions, such as hard device errors
Error messages
Warning messages
Conditions that are not errors but may require attention
Information messages
Debug messages
®
Connex Spot Monitor