Create A Waclientcert.pim File Using The Wast; Load A Waclientcert.pim File To The Csm - Welch Allyn Connex Spot Monitor Service Manual

Service manual
contains the customer certificates, commands, and information on how the certificates
are loaded, and what folders the certificates are written to on the radio file system.
Note

Create a waclientcert.pim file using the WAST

The Welch Allyn Service Tool (WAST) can create the waclientcert.pim file using a CA
certificate alone (server verification only) or a CA certificate and client certificate (for
client authentication).
1. Create a folder on the PC or thumb drive and save the CA certificate there. If the
client certificate is needed, save it in the same folder.
2. Connect a CSM to the PC running the WAST and allow it to come up to a usable
state.
3. In the WAST device list, select the CSM.
4. Click Configure and Current Settings / Change.
5. Click Network Policy Server Certificate.
6. Under Generate, click Browse and select the folder where the customer certificate
or certificates are saved.
The Select Certificate Folder field displays the path to the folder.
7. If creating a client authentication certificate, such as EAP-TLS, enter the password
created for the client certificate in the Network Policy Server Certificate field and in
the Confirm Password field.
Note: If the folder does not have a CA certificate and a client certificate, these fields
are grayed out. The WAST does not verify the client password.
8. Click Generate Network Policy Server Certificate Package. Under Load, click
Browse to select the destination for the waclientcert.pim file. Click OK.
9. In the Certificate package is successfully generated dialog box, click OK.
The waclientcert.pim file is loaded in the destination folder along with the raw
certificate files.

Load a waclientcert.pim file to the CSM

1. Disconnect the USB link between the PC and the CSM.
2. Launch the WAST on the PC.
3. Restart the CSM and allow it to come up to a usable state.
4. Connect the USB link from the PC to the CSM.
5. Select the CSM from the WAST device list.
6. Click Configure.
7. Click Current Settings / Change.
8. Click Network Policy Server Certificate.
9. Under Load, click Browse to locate the destination of the waclientcert.pim file.
You cannot re-name an existing customer client certificate or ca certificate
to waclientcert.pim and upload it because the certificate lacks information
on where the certificates need to be deployed on the radio and how the
product should handle the file. The waclientcert.pim file must be created
using a Welch Allyn process.
Wireless radio technology 39