Prepare To Clean The Equipment - Welch Allyn Connex Spot Monitor Service Manual

94 Cleaning requirements

Prepare to clean the equipment

Select a cleaning agent from the following table.
Section 1. Approved for all Connex Spot Monitor components
Cleaning agent
Accel INTERVention
Accel TB
CaviWipes
Clinell® Universal Wipes
Oxiver TB
Sani-Cloth
Super Sani-Cloth
70 percent isopropyl alcohol solution
Section 2. Not approved for all Connex Spot Monitor components
Note
Cleaning agent
Cleancide
Clorox HealthCare Bleach Germicidal Cleaner
Sani-Cloth
Super HDQ
Tuffie5 Cleaning Wipes
Virex II (256)
10 percent bleach solution
CAUTION Some cleaning agents are not appropriate for all components of
the device. Use only approved cleaning agents, and observe restrictions
noted for some components in the following table. Using unapproved
cleaning agents may cause damage to components.
CAUTION Do not use bleach solutions of any kind when cleaning metal
electrical contacts. They will damage the device.
®
Plus
®
The following cleaning agents are NOT approved for cleaning Connex Spot
Monitors equipped with the Braun ThermoScan PRO 6000.
®
Bleach
®
L10
Additional information
Applied to a clean cloth
Additional information
Not approved for cleaning the display
Dilution rate of ½ oz per gallon of water (1:256) applied to a clean
cloth
Dilution rate of ½ oz per gallon of water (1:256) applied to a clean
cloth
(.5% - 1% sodium hypochlorite) applied to a clean cloth
®
Connex Spot Monitor